Description

GF Signet 3-9950-2 Dual Channel Transmitter

PT PROFILTER INDONESIA adalah importir distributor agen dan supplier GF Signet 3-9950-2 Dual Channel Transmitter terlengkap menyediakan berbagai kebutuhan spare part filter untuk keperluan industri dengan kualitas dan harga terbaik.

The 9900 and 9950-X Multi-Parameter Controllers are field-commissioned with a user-specified combination of inputs, outputs and relays using easy-to-install modules within the base unit. The GF transmitters and controllers support GF Flow, pH/ORP, Conductivity/Resistivity, Salinity, Temperature, Pressure, Level, Dissolved Oxygen and devices that transmit a 4 to 20 mA signal with the use of the 8058 iGo® single channel converter.

Overview GF Signet 3-9950-2 Dual Channel Transmitter

The 9950 Dual Channel Transmitter is a two channel controller that can support two sensors of same or different types in one instrument. The sensor types supported by the 9950 are Signet Flow, pH/ORP, Conductivity/Resistivity, Salinity, Temperature, Pressure, Level, Dissolved Oxygen, and devices that transmit a 4 to 20 mA signal with the use of the 8058 iGo® Signal Converter.

The 9950 includes advanced features such as derived functions, advanced multiple relay modes, and timer based relay functions. Derived functions allows for the control of a relay or current loop with the sum, delta (difference), or ratio of two measurements. Multiple relay modes allow up to three signals to be used for the control of a single relay, and can be any combination of analog and binary inputs. The timer relay modes allow a relay to be activated on a repeating basis from every minute to once every 30 days. Weekday timer mode allows a relay to be energized, on a specific day or days of the week at a specific time.

The 9950 supports the following modules:

Four Channel Mechanical Relay Module
Two Mechanical and Two Solid State Relay Module
Two Mechanical Relays and Four Binary Inputs Module
Direct Single Channel Conductivity Resistivity Module
Dual Channel 4 to 20 mA Current Loop Output Module
Dual Channel Conductivity Module
Modbus Module

Features

Instruments:

One instrument for multiple sensor types
Two different sensor types can be combined in one instrument
Configurable display
Derived measurements
USB Port for field upgrades using standard USB flash drive

Compatibility

pH and ORP electrodes require the Signet 2750 or 2751 DryLoc ® Sensor Electronics (sold separately).
Conductivity/Resistivity measurement requires the Signet Direct Conductivity Resistivity Module, Dual Channel Conductivity Module or 2850 Conductivity/Resistivity Sensor Electronics (sold separately).

Note: The 9950 is not compatible with the 3-2850-63 Dual Channel 2850 device.

The 3-9950.393-3 Relay Module provides four binary inputs that are compatible with any open collector or mechanical contacts, such as level switches, flow switches, pressure switches or other devices.

The 9950 offers advanced features such as derived functions, advanced multiple relay modes (Boolean logic), and timer-based relay functions.

The 9950 Modbus Module allows for remote access to primary and secondary measurements, derived functions, status of current loop outputs and relays, over a serial RS485 Modbus automation network.